Mô đun tăng áp dc-dc tự động có thể tự điều chỉnh

Máy tính & Laptop > Linh Kiện Máy Tính > Nguồn Máy Tính || Mô đun tăng áp dc-dc tự động có thể tự điều chỉnh
  • Giao hàng toàn quốc
  • Được kiểm tra hàng
  • Thanh toán khi nhận hàng
  • Chất lượng, Uy tín
  • 7 ngày đổi trả dễ dàng
  • Hỗ trợ xuất hóa đơn đỏ

Giới thiệu Mô đun tăng áp dc-dc tự động có thể tự điều chỉnh


Brand Sindhia Electronics ; Model p0 d ; Automatic Voltage Reduction Power Module Adjustable voltage stabilization power supply sjv

# Power # Module # Module # Adjustable # Voltage # Power
Product parameters :

Input voltage : 5.5 30v

Output voltage : 0.5 30v

Output current : working in 3a for long term stability , 4a under enhanced heat dissipation

Output power : Natural heat dissipation , 30 w , Strengthening heat dissipation by 50w

Conversion efficiency : About 88

Short circuit protection : Yes

Working frequency : 180khz


Dimensions : Long * width * 56 * 20 * 21mm

Weight : 17g

Notes :

1 . This module is of a constant pressure type , Not recommended for battery charging or rd driven situations requiring constant currents , On the occasion of the constant current , we can choose the module of the automatic lifting and falling pressure of constant flow in our shop .

Please make sure the power supply is powerful at all times greater than the output load .

3 . Module input without input backlash function , Please note the positive and negative direction of the power supply .

4 . If the module wants to be full of output , more than 7v input voltage , When the input voltage is 5.5 v , The output power is about 15 w .

5 . Short circuit protection of modules with output , After the short circuit protection module automatically shuts down the output , Recharging the module can be reinstated , If your power supply is not protected by output current limits , Recommends that fuses be fused in series at the front end of the module , Increased safety coefficient .

6 . The module has an input undervoltage protection function , The default is about 5v , Less than this value , will automatically disconnect the output , Recharge the module and recover ( Note the voltage at the port of the module , When the input current is larger , ( Don 't ignore the partial pressure on the input wire )
Giá INV
Liên kết: Phấn phủ khoáng dạng bột Tone Up Loose Powder fmgt The Face Shop