Mô đun rơ le hẹn giờ 5V -30v tự làm chuyên dụng
29.304 đ
Uy tín
Giao toàn quốc
Được kiểm hàng
Chi tiết sản phẩm
Tình trạng
Mới
SKU
2197908576

Features:
By adjusting the potentiometer can set the length of time
Micro USB 5.0V power supply with an input port, easy to use
External signal trigger and key trigger in two ways
With a relay indicator
Anti-interference ability, the relay at various interference will not misoperation, suitable for industrial control
Working voltage: wide voltage 5 ~ 30V, two power supply interface
Operating mode: the initial state, module outputs: normally open (NO) and the common terminal (COM) is disconnected, normally closed (NC) and the common terminal (COM) connected
Providing a low pulse signal, or touch trigger key, relay and indicator lights, the output of the state: normally open (NO) and Common (COM) connected, normally closed (NC) and the common terminal (COM) is disconnected. After 0-24 seconds (this time can be adjusted according to your needs) relay off, back to the state before the trigger
The length of timing adjustment by potentiometer, default 0-24 seconds. If you need more time, you can replace the larger capacitor (C2) or potentiometer. Delay time T = 1.1RC. For example: 22uf capacitor and resistor 1M, then T = 1.1 * 0.000022 * 1000000 = 24.2 seconds
The module can control: 10A / 250VAC, 10A / 30VDC load
The relay has a freewheeling protection
Trigger signal input terminal is designed with a pull and filter circuit, enhanced anti-jamming capability, suitable for industrial control. Many manufacturers add the optocoupler isolation, but there is no separation between module's ground and signal's ground, would not achieve the interference effect. After the test found that only enhance the stability of the signal input port to interference, regardless of this module is under electromagnetic interference environment, or in the power-up and power-down moment, the relay will not produce misoperation
Applications:
1. Burglar, alarm, building delay switch, sound and light control light switch
2. Delay powered vehicle equipment, to prevent large currents generated as the car starts burning vehicle equipment
3. Prevent simultaneous launch multiple devices cause burning appliances or fail to start
Size: 5.3x1.9cm/2.09x0.75inch
Quantity: 1 Pc
Note:
Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package includes:
1 x Power Delay Timer Control Module